Wall Profile NWSSW32 / North West Sheeting Supplies

Telephone: 01282 619430

Metal Roofing and Cladding Profiles

Roofing Sheet Profiles Wall Cladding Profiles Liner Profiles Other Profiles

Insulated Metal Roofing and Cladding Systems

Roofing and Cladding Accessories

GRP Rooflights and Fillers Roof Flashing and Trims Zed Purlins Fixings and Fittings

Information

Coatings Coating Colour Chart Order and Delivery FAQ Anti Condensation Backing Special Offer Material Care and Handling Laying, Fixing Procedures

Market Sectors

Agricultural Industrial Refurbishment

Cladding Profiles > Wall Profile NWSSW32

Wall Profile NWSSW32

Table 1 : Permissable wind pressure (positive) loads in kN/m2 - deflection limit span /150

Sheet Thickness	Weight kg/m2	Span Condition	Span mm
Sheet Thickness	Weight kg/m2	Span Condition	1200	1400	1600	1800	2000	2200	2400	2600	2800	3000	3200
0.50mm	4.78	single	3.40	2.46	1.86	1.45	1.07	0.80	-	-	-	-	-
		double	2.03	1.56	1.24	1.01	0.84	-	-	-	-	-	-
		multi	2.50	1.93	1.53	1.25	1.03	0.87	0.75	-	-	-	-
0.70mm	6.22	single	4.96	3.59	2.71	1.98	1.42	1.06	0.81	-	-	-	-
		double	3.30	2.53	2.00	1.63	1.35	1.14	0.97	0.84	-	-	-
		multi	4.06	3.12	2.47	2.01	1.67	1.41	1.20	1.04	0.84	-	-
0.90mm	8.42	single	7.51	5.43	3.92	2.72	1.96	1.46	1.11	0.87	-	-	-
		double	5.07	3.85	3.03	2.44	2.01	1.67	1.40	1.19	1.02	0.88	0.77
		multi	6.29	4.78	3.76	3.04	2.50	2.09	1.75	1.45	1.16	0.94	0.77

Table 2 : Permissable wind suction (negative) loads in kN/m2 - deflection limit span /150

Sheet Thickness	Weight kg/m2	Span Condition	Span mm
Sheet Thickness	Weight kg/m2	Span Condition	1200	1400	1600	1800	2000	2000	2400	2600	2800	3000	3200
0.50mm	4.78	single	2.65	1.92	1.45	1.13	0.91	0.75	-	-	-	-	-
		double	2.34	1.82	1.46	1.19	1.00	0.84	-	-	-	-	-
		multi	2.85	2.22	1.78	1.46	1.22	1.04	0.89	0.77	-	-	-
0.70mm	6.22	single	4.21	3.04	2.30	1.80	1.42	1.06	0.81	-	-	-	-
		double	3.63	2.81	2.24	1.82	1.52	1.28	1.10	0.95	0.83	-	-
		multi	4.45	3.44	2.75	2.24	1.87	1.58	1.35	1.06	0.84	-	-
0.90mm	8.42	single	5.91	4.27	3.23	2.53	1.96	1.46	1.11	0.87	-	-	-
		double	5.90	4.53	3.59	2.91	2.41	2.03	1.73	1.45	1.16	0.94	0.77
		multi	7.27	5.59	4.43	3.60	2.98	2.43	1.86	1.45	1.16	0.94	0.77

This profile can be fixed horizontally, vertically or even diagonally. Laying the profile horizontally also permits the inclusion of horizontally mitred corners or curved profile corners. All are featured in the relevant section. A profile thickness of 0.70mm should be used for these applications.

| Privacy Policy |
Site Map |

North West Sheeting Supplies, Unit 23 Bizspace, Lomeshaye Business Village, Turner Road, Nelson, Lancashire, BB9 7DR.
Tel 01282 619430, Fax 01282 619431. Copyright ©2010 North West Sheeting Supplies. All Rights Reserved.
Website by Prospatek, powered by Britnett.