Wall Profile NWSSW32

Wall Profile NWSSW32

 

Table 1 : Permissible wind pressure (positive) loads in kN/m2 – deflection limit span /150

NOTE: Please view LANDSCAPE on mobile phone

 

Sheet ThicknessWeight kg/m2Span ConditionSpan mm
12001400160018002000220024002600280030003200
0.50mm4.78single3.402.461.861.451.070.80
double2.031.561.241.010.84
multi2.501.931.531.251.030.870.75
0.70mm6.22single4.963.592.711.981.421.060.81
double3.302.532.001.631.351.140.970.84
multi4.063.122.472.011.671.411.201.040.84
0.90mm8.42single7.515.433.922.721.961.461.110.87
double5.073.853.032.442.011.671.401.191.020.880.77
multi6.294.783.763.042.502.091.751.451.160.940.77

 

Table 2 : Permissible wind suction (negative) loads in kN/m2 – deflection limit span /150

Sheet ThicknessWeight kg/m2Span ConditionSpan mm
12001400160018002000200024002600280030003200
0.50mm4.78single2.651.921.451.130.910.75
double2.341.821.461.191.000.84
multi2.852.221.781.461.221.040.890.77
0.70mm6.22single4.213.042.301.801.421.060.81
double3.632.812.241.821.521.281.100.950.83
multi4.453.442.752.241.871.581.351.060.84
0.90mm8.42single5.914.273.232.531.961.461.110.87
double5.904.533.592.912.412.031.731.451.160.940.77
multi7.275.594.433.602.982.431.861.451.160.940.77

The Wall Profile NWSSW32 is our most popular wall profile.This profile can be fixed horizontally, vertically or even diagonally. Laying the profile horizontally also permits the inclusion of horizontally mitred corners or curved profile corners.  A profile thickness of 0.70mm should be used for these applications.

Pin It on Pinterest

Share This